DIY Mountain Pillow

DIY Mountain Pillow:

What you'll need:

- thick fabric for the base of the mountain
- White fabric for the snow peaks
- Mountain Pillow Pattern
- Corresponding thread
- sewing pins
- sewing machine
- stuffing

How to do it:

1. Using the pattern, cut out two mountain pieces. The pattern is 20″ x 20″, so if you don’t own a large-format printer, you can either print it out in tiles and tape them together, or you can take it to your local print shop and have them print it out in a large format there.

2. Cut out one snow-peaked shape from the pattern and pin it to the top of one of the mountain pieces of fabric.

3. Stitch the snow fabric to the top of one piece of mountain fabric. Be sure to stitch all the way around the snow peak shape.

4. With right sides together, pin the back of the mountain to the front.

5. With 5/8″ seam allowance, stitch all the way around the mountain shape, leaving an opening at the bottom for turning and stuffing.

6. Clip corners and trim the seam allowance.

7. By reaching into the lower opening, turn the pillow right-side out. Make sure peaks and corners are turned out nicely. You can use a wooden dowel for corners if you wish.

8. Fill mountain pillow with stuffing.

9. Adjust stuffing, filling peaks and corners, until you are happy with your pillow. Again, you can use your wooden dowel to help with this step.

10. Slip stitch the lower part of the mountain closed.

11. Now sit back and enjoy your little piece of alpine goodness. Or share this with a friend for the perfect snow-peaked present!

Enjoy!


DIY Tribal Egyptian Necklace

DIY Tribal Egyptian Necklace:

What you'll need:

- Beaded chain
- Metallic wire
- beads ( Blue, Red, Black)

How to do it:

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

MY DIY, egyptian necklace diy,tribal necklace diy,fashion diy, fashion DIY, necklace diy, beaded necklace diy,tutorial,how to, do it yourself

Done!

Enjoy!



The White Ballerina blog

Are you a fan of ballet? If you are then you'll love The White Ballerina! It's a ballet DIY blog which will give you the best tutorials from how to make ballet legwarmers to how to do the splits and oversplits. Be sure to check it out at http://thewhiteballerina.blogspot.com/!

The White Ballerina

Enjoy!



My Owl Top

My Owl Top:

Today I decided to design my sister's old white top. Since I love owls, I chose to do an owl pattern on the top. Here is what it looks like:



Up close:
















Do you like it?

Fabric Friendship Bracelet

Fabric Friendship Bracelet:



What you'll need:

- fabric strips (about 2ft long, preferably cotton)
- a clip to hold your fabric

How to do it:

1. Choose 3 strip of fabric. Secure it with your clip to keep it in place.



2. Start braiding your fabrics. When you get close to the end, measure the bracelet to your wrist.
Since this is a slip on bracelet, you would want to make sure you have enough room to wiggle the bracelet over your hand.



3. Once you have made the bracelet to fit your hand, sew both ends of the bracelet together. Make sure that all the fabrics have been sewn together.



4. Trim off the strings and cut the fabric to just above where you sewed.



5. To cover up the sewed edges, cut or tear a piece of fabric about 2 inches wide and about 8 inches long. Slip the fabric into the bracelet where you sewed the ends and tie a single knot. Trim off the extra fabric from your knot. 





Enjoy!


DIY Gold Twig Bangles

DIY Gold Twig Bangles: 

How to make your own twig bangle.

What you'll need:

- Some twigs (Fresh is best as they are more bendy than if they have dried out)
- Gold Metallic Spray Paint
- Glue or glue gun
- some thread

Below you can find the link to buy the Gold Metallic Spray Paint as well as the hot glue guns. I would say that the Kyrlon spray paint has a nicer finishing touch than the Rust Oleum one but then it all depends on your budget. I prefer using the KSANA one but I find that the mini high-temp one works quite well and is useful for small projects such as this one. 







How to do it:

1. Cut the twigs into lengths to make a circle that fits your hand.
2. Bend them into the rounded shape, doubling up the end.
3. Wrap the doubled up end with thread to secure the bangle shape.
4. Put a dot of glue and to secure the thread.
5. Spray paint the bangles – making sure to coat entirely. Do a few coats if necessary.
6. Let dry completely.







Enjoy!

Romwe Generic Fall & Winter

The Hippie Bracelet


 

The Hippie Bracelet:

What you'll need:

- 7 embroidery threads, 60 inches each (folded in half to make 14 working strings)

What you'll need:

1. Start with your favorite way of starting a bracelet. this could be a buckle, a braid on each end (in this case, your starting strings should be a bit longer), or a simple overhand knot. I chose to make my version of the buckle. Search the tutorial page for directions.


2. Pick your first color. This will be your first wrapping string. Set aside.


3. Pick two more strings. These will be your "criss-cross" strings. These strings are optional; you may use them once in awhile, or not at all. They can be the same or different color. Set aside.


4. With your optional criss-cross strings up and out of the way, take your wrapping string and make half a forward knot around the rest of your strings.



5. Begin wrapping! Simply wrap this thread tightly around your bunch of strings, making sure there is no overlap or spaces.


6. Decide how much of your bracelet you'd like wrapped in this color. You could wrap your entire bracelet in this color, but for this bracelet, I'm going to stop at about 3/4 inch. To keep the string from unraveling, tie another half forward knot.


7. Now's the time to use your optional criss-cross threads. take the two strings and tightly criss-cross the threads a few times around the section you just wrapped.


8. Holding your criss-cross threads in place, choose another wrapping thread and two more criss-cross threads. Set your new criss-cross threads aside, use your new wrapping thread to tie a half forward knot around all remaining threads, and repeat!



 

 

Enjoy!

A cute little vintage idea

Vintage shoe box suitcase:

What you'll need:


- Shoe boxes
- White paint
- Markers

How to do it:

1. Grab your shoe boxes.

2. Paint them in white.

3. Let them dry.

4. Then doodle on them to make them look like vintage suitcases.
Done! So so simple!

Enjoy!

Shop SheIn for the latest in Fall and Winter Fashions